Pilot RC 103" Laser (Yellow/Black)

£1,139.95

FEATURES:

NEW! Full Carbon reinforced fuselage and wing using carbon laminated wood and carbon stringers.
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no external screws exposed
Includes cooling baffles
Exhaust tunnel pre-installed in fuselage for easy canister installation
Removable rudder (as well as removable wings and stabs)
Laser engraved motor mounting position
Push-Pull system for Rudder servos

*Due to carbon construction, this kit does not offer Free replacement wood

INCLUDED HARDWARE:

Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pull-pull wires and pushrods with ball links
Matching carbon spinner

REQUIRED HARDWARE:

Motor: 80-120cc or equivalent electric

Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Model: Laser – 35%

Wingspan: 103″ (2.610mm)

Length: 93.7″ (2.380mm)

Wing Area: 1,771 “² (11,430 cm²)

Weight: 27.5lbs (12.5kg)